Parking (Easel Pro) moves your machine out of the way when a carve finishes, so it's easier to reach your finished piece and swap in new material.
Parking your machine
- When your carve finishes, the Carve Complete window opens. Scroll down in the Jog Machine panel on the right to Park Machine (1).
- Click one of the Park Here buttons (2). Your machine moves along the Y axis past the edge of your material, either behind it or in front of it.
The distance (3) shows how far past the edge of your material the machine will move.
| Important: Parking only works if there's enough room between the edge of your material and the end of your machine's work area. If there isn't, the Park Here buttons are greyed out. |
| Helpful Tip: Carving several copies? Use Parking together with Quick Repeat Carving to swap material faster. |