Original Equipment Manufacturer Machines (OEM) and 3rd Party Software
Easel and Easel Pro will connect and work with machines using the open-source GRBL firmware, which is limited to Arduino-based controllers. If you do not have an Inventables machine, some settings in Easel may need to be adjusted to work properly.
- OEM Partner Machine Profile Setup
- Machine won't connect (OEM Partner Machine)
- OEM Machine is Pausing (Limits Enabled)
- Non-Grbl Machine Setup (OEM Partner Machine)
- Carves too small or large (OEM Partner Machine)
- Spindle Won't Turn On (OEM Partner Machines)
- Add Easel's post-processor to your Vectric software
- Installing Fusion 360 Post Processor
- Using MeshCAM with Easel